Common Repairs Found During Inspections

R22 Coolant in HVAC Systems
R22 coolant was used in most HVAC systems until 2010 and it was known to deplete the ozone layer. In 2010, the EPA. stopped the sale of new air conditioning units that use R22. In 2020, the US banned the manufacture or import of R22. Because of this, most HVAC systems built in 2010 or earlier that use R22 (which is most systems built during this time) are obsolete. If the coolant leaks, you cannot refill it. If the system breaks, most HVAC techs will recommend a total replacement.

Fogged Windows 
All homes built from 2000 to present will have double-paned (and sometimes triple-paned) windows, which is great. When double-paned windows lose their seals, they will fog, which isn’t great. This is a cosmetic issue, but they do look bad, and they will be written up in the inspection. It is roughly $200 per window to replace the panes.

Fogged Windows
Most homes built from 2000 to present will have double-paned windows, which is great. When double-paned windows lose their seals, they will fog, which isn’t great. This is a cosmetic issue, but they do look bad, and they will be written up in the inspection. It is roughly $200 per window to replace the panes.

Masonite Siding
This is a siding material that is no longer in use because it is a poor product. Masonite is a pressboard product that will soak in water and then deteriorate. Masonite siding is not a problem with regular maintenance (paint) but many homes built in the 1990s have not been perfectly maintained, so it’s normal to see issues. Replacing all of the siding is very costly. You can typically replace sections of the siding and repaint as a much more cost-effective solution.

Aluminum Wiring (1968-1976)
Aluminum wiring was very common during these years, but you sometimes see aluminum wiring in homes built in other years from 1960-1990. Aluminum is less than ideal because it expands and contracts as it heats and cools, which can cause the connection points to loosen over time. You do not need to replace aluminum wiring (per code.) There are different opinions on the subject, but it’s code to either pigtail the aluminum/copper connections or to replace the outlets with CO/AL-rated outlets.

Lead-Based Paint (<1978)
Lead-based paint is a potential health risk and lead paint was banned in 1978. According to the EPA, 24% of homes built from 1960-1978 have lead paint and 87% of homes built <1940 have lead paint. It’s safe to assume that the older a home is, the higher the likelihood that it has lead-based paint. Lead-based paint is harmful when ingested and conditions are most dangerous when paint is peeling or chipping. RealSimple has an excellent write up here.

Foundation Problems
Foundation design was better in the 1980s than the 1970s and it was better in the 1970s than the 1960s, but it wasn’t great in any decade. In Austin, there is more expansive clay as you head east. It’s a good idea to be more aware of a property’s foundation as you look at older homes and as you head east. There are some neighborhoods in Austin with known foundation problems and we can help you identify them when you’re looking in one of these neighborhoods.

Federal Pacific Electrical Panel
“FedPac” panels were one of the most common electrical panels from the 1950s to 1980s. Federal Pacific lost a lawsuit in 2005 and is no longer in business. There are no conclusive studies to determine if there is additional risk to owning a home with a FedPac panel (and there are still millions of homes with these panels) but inspectors will always call out these panels and electricians will always recommend that you replace them. More Information is Available Here.

Single Paned Windows
Double-paned windows didn’t exist until the 1980s and weren’t common until the 1990s. When you’re looking at homes built in the 1980s or earlier, it’s great to take note of whether or not the windows have been replaced with double-paned windows. Double-paned windows look nicer, they block noise, and they’re far more energy efficient than single pane.

Cast Iron Plumbing
Cast iron plumbing was used in almost every home built pre-1970. This is the sewer line that runs under the house and to the street (in the ground.) Cast iron rusts over time and will fail. It’s a very expensive fix in the tens of thousands. When looking at older homes, it’s very important to note if the sewer lines have been replaced or not.

Lead-Based Paint (<1978)
Lead-based paint is a potential health risk and lead paint was banned in 1978. According to the EPA, 24% of homes built from 1960-1978 have lead paint and 87% of homes built <1940 have lead paint. It’s safe to assume that the older a home is, the higher the likelihood that it has lead-based paint. Lead-based paint is harmful when ingested and conditions are most dangerous when paint is peeling or chipping. RealSimple has an excellent write up here.

Outdated Electrical Panels
We see many Federal Pacific electrical panels in homes built in the 1960s, but almost every panel installed in this decade is now considered outdated. It’s great to look to see if the electrical panel and service have been updated. If they haven’t, it’s almost certain that an inspector will call this out and an electrician will recommend a replacement.

Aluminum Wiring (1968-1976)
Aluminum wiring was very common during these years, but you sometimes see aluminum wiring in homes built in other years from 1960-1990. Aluminum is less than ideal because it expands and contracts as it heats and cools, which can cause the connection points to loosen over time. You do not need to replace aluminum wiring (per code.) There are different opinions on the subject, but it’s code to either pigtail the aluminum/copper connections or to replace the outlets with CO/AL-rated outlets.

Foundation Problems
Foundation design was relatively new in the 1960s, so it’s common to see problems. Most homes built in the 1960s have a foundation movement that is beyond tolerance if the home is east of Mopac. Homes west of Mopac sit on more stable soil (limestone) so foundation problems aren’t as common.

Single Paned Windows
No homes built in the 1960s had double-paned windows, but many have been replaced over the years. It’s a great idea to take note of this when shopping.

Foundation Problems (Pier & Beam)
Slab foundation engineering began in the 1950s and it’s common to see issues in homes east of Mopac. Many homes built in the 1950s are on a pier and beam (crawlspace) foundation and almost all homes built pre-1950 are on pier and beam. This type of foundation is less expensive to fix than a slab, but it’s very common for them to be out of level. It’s so common, in fact, that it’s normal to “shim” a pier and beam slab every 10 years to correct the movement.

Cast Iron Plumbing
Cast iron plumbing was used in almost every home built pre-1960. This is the sewer line that runs under the house and to the street (in the ground.) Cast iron rusts over time and will fail. It’s a very expensive fix in the tens of thousands. When looking at older homes, it’s very important to note if the sewer lines have been replaced or not.

Lead-Based Paint (<1978)
Lead-based paint is a potential health risk and lead paint was banned in 1978. According to the EPA, 24% of homes built from 1960-1978 have lead paint and 87% of homes built <1940 have lead paint. It’s safe to assume that the older a home is, the higher the likelihood that it has lead-based paint. Lead-based paint is harmful when ingested and conditions are most dangerous when paint is peeling or chipping. RealSimple has an excellent write up here.

Outdated Electrical Panels
Almost every panel installed pre-1960 decade is now considered outdated. It’s great to look to see if the electrical panel and service have been updated. If they haven’t, it’s almost certain that an inspector will call this out and an electrician will recommend a replacement.

Ungrounded Electrical Outlets
You can tell if the outlets are ungrounded because they will be 2-prong (instead of 3.) If this is the case, then there’s no ground. Beyond the fact that you have to buy an adapter to plug in lots of electronics, the lack of a ground is a safety hazard. Grounding every outlet is expensive. You can install GFCI outlets throughout as a less expensive solution that is per code. Many electricians will recommend grounding one outlet per room as a less expensive solution that is much safer than ungrounded outlets.

Asbestos Siding
Asbestos siding is extremely common in homes built pre-1960. Hey, asbestos is a great insulator! The good news is that asbestos siding becomes a problem only when it’s crushed and the dust gets into the air. If you choose to replace the siding, there is an additional disposal cost for asbestos, so it’s more expensive to replace than any other type of siding.